CPC32420
Certificate III in Plumbing

Home
Courses
Certificate III in Plumbing

The fee you pay at TasTAFE will depend on the course you choose and may vary depending on the level of government subsidy available, the cost of delivery, any previous study you have undertaken and/or your personal circumstances.

Our fee estimator will give you an indication of the type of fee you might expect to pay, but is intended as a guide only and doesn’t include other costs associated with your course. Please contact us on 1300 655 307 to confirm your fee.

Are you an Australian citizen, a Permanent resident or a New Zealand citizen?

Back to Plumbing & Electrical

Course overview

Back to Plumbing & Electrical

Locations

South
Clarence

Attendance options

Part-time

Study type

Apprentices/Trainees

2025 Tuition fees

Subsidised $ 3,710.00
Concession* $ 400.00

Additional fees may apply. For more information, see Fees, payments and other costs.

Submit an enquiry

Please note: The course overview is intended as a guide only. Not all courses are available at all locations or through all study types and attendance options. Please check Locations, Dates and Times below or enquire for further information.

Gain the skills and knowledge you need to establish your career in the Plumbing industry.

This nationally recognised qualification will enable you to gain the skills and knowledge you need to begin your career and work in the Plumbing industry.

In this course, you will learn how to provide a diverse range of plumbing services to suit domestic, commercial and industrial needs such as cold and hot water supply, gas supply, sewerage, waste and rainwater disposal. You‘ll also have the opportunity to learn how to safety install, alter and repair pipework and appliances while ensuring you remain compliant with Australian Standards, relevant legislation and WHS requirements.

On successful completion of this qualification, you will have the skills you need to undertake a variety of work within the Plumbing industry, and be eligible to apply for a Plumbing Licence at the end of your apprenticeship. You might also like to consider taking your career to the next level and undertake further study at TasTAFE with CPC40920 – Certificate IV in Plumbing and Services.

This course is only available as an Australian Apprenticeship. You must have employment as an apprentice to enrol in this qualification.

This nationally recognised qualification will enable you to gain the skills and knowledge you need to begin your career and work in the Plumbing industry.

This course is only available as an Australian Apprenticeship. You must have employment as an apprentice to enrol in this qualification.

Interested in starting this course?

Contact us today to express your interest or make an enquiry.

Call 1300 655 307 Submit an enquiry

Entry

We encourage you to consider if this is the right course for you by reading the Informed Choices document (Word).

As part of the application process, and before being offered a place in the course, a member of our Team will contact you to discuss if this course aligns with your goals and aspirations, and to ensure that you are fully informed and understand the course requirements.

Fees, payments and other costs

Your tuition fees cover the basic materials needed for your course, but may not cover items such as text books, workbooks, uniform, online learning resources or personal protective clothing. Depending on your course, there may also be other expenses that you need to budget for.

For courses undertaken in 12 months or less, you will be invoiced the full course fee (including any other essential fees associated with your course).

*For courses studied over multiple years, your course and other fees will be split over the years of study, with the concession fee being charged on a yearly basis. At the time of enrolment you will be invoiced for the first year’s fees. An invoice will be raised in each subsequent year around the same time as your ‘enrolment anniversary’.

Further information on fees, payments and other costs.

Recognition of prior learning and skills

It makes sense that you should be recognised for the things you already know how to do.

TasTAFE can assess your skills and knowledge based on your previous education, work history or life experience – which may help you to gain your qualification a whole lot faster!

More information on the recognition process is available on our recognition of prior learning and skills page.

Assessment methods

Assessments are designed to help you demonstrate the skills and knowledge you learn in your course and are an essential part of your training. Assessments allow us to confirm that you can perform tasks to the standard required in the workplace, and that you can meet all of the requirements of your course.

While studying at TasTAFE, you may be assessed in a number of different ways. Some common assessment methods include:

completing workplace documents
observations on the job and/or in a simulated assessment environment
quizzes/multiple choice tests
research projects
tests – written or practical
verbal questioning
work samples
written assignments or short answers.

What you will need

There are different requirements depending on the course you are enrolled in.

Generally, it is recommended that you have access to a computer with a reliable internet connection and up-to-date software, including Microsoft Office and Adobe Acrobat Reader. TasTAFE has computers available for student use during normal business hours, at all major campuses.

For classes, please be prepared with standard items such as: pens, notebook or paper, USB.

You may also need to bring specific equipment, tools or personal protective equipment, your teacher will let you know.

Outcome and units

On successful completion of this course you will receive a CPC32420 - Certificate III in Plumbing.

Below is a list of all elective units that TasTAFE offers in this course. The selection of units you will be enrolled into depends on the campus you attend and the qualification packaging rules. For further information refer to training.gov.au.

Elective units
CPCCCM2008	Erect and dismantle restricted height scaffolding
CPCCCM2012	Work safely at heights
CPCCCM3001	Operate elevated work platforms up to 11 metres
CPCCWC2001	Complete penetrations and flashings
CPCCWHS2001	Apply WHS requirements, policies and procedures in the construction industry
CPCPCM2039	Carry out interactive workplace communication
CPCPCM2040	Read plans, calculate quantities and mark out materials
CPCPCM2041	Work effectively in the plumbing services sector
CPCPCM2043	Carry out WHS requirements
CPCPCM2045	Handle and store plumbing materials
CPCPCM2046	Use plumbing hand and power tools
CPCPCM2047	Carry out levelling
CPCPCM2048	Cut and join sheet metal
CPCPCM2049	Cut using oxy-acetylene equipment
CPCPCM2052	Weld mild steel using oxy-acetylene equipment
CPCPCM2053	Weld using metal arc welding equipment
CPCPCM2054	Carry out simple concreting and rendering
CPCPCM2055	Work safely on roofs
CPCPCM3021	Flash penetrations through roofs and walls
CPCPCM3022	Weld polymer pipes using fusion method
CPCPCM3023	Fabricate and install non-ferrous pressure piping
CPCPCM3024	Prepare simple drawings
CPCPCM3025	Install trench support
CPCPDR2021	Locate and clear blockages
CPCPDR2025	Install stormwater and sub-soil drainage systems and drain work site
CPCPDR2026	Install prefabricated inspection openings and inspection chambers
CPCPDR3021	Plan layout and install below ground sanitary drainage systems
CPCPDR3023	Install on-site domestic wastewater treatment plants and disposal systems
CPCPDR3025	Plan layout and install vacuum drainage systems
CPCPFS3031	Fabricate and install fire hydrant and hose reel systems
CPCPFS3038	Test and maintain fire hydrant and hose reel installations
CPCPGS3046	Install LPG systems in caravans, mobile homes and mobile workplaces
CPCPGS3047	Install LPG systems in marine craft
CPCPGS3048	Install gas pressure control equipment
CPCPGS3049	Install gas appliance flues
CPCPGS3051	Purge consumer piping
CPCPGS3052	Maintain Type A gas appliances
CPCPGS3053	Disconnect and reconnect Type A gas appliances
CPCPGS3054	Calculate and install natural ventilation for Type A gas appliances
CPCPGS3055	Install gas sub-meters
CPCPGS3056	Size and install consumer gas piping systems
CPCPGS3059	Install LPG storage of aggregate storage capacity up to 500 litres
CPCPGS3060	Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 kl
CPCPGS3061	Install and commission Type A gas appliances
CPCPMS2021	Assemble mechanical services components
CPCPMS3031	Fabricate and install steel pressure piping
CPCPMS3032	Select and fit insulation and sheathing
CPCPMS3033	Install small bore heating systems
CPCPMS3035	Install and test ducting systems
CPCPMS3036	Install air handling units
CPCPMS3037	Install and commission a single head split system air conditioning
CPCPMS3038	Install air conditioning control equipment
CPCPMS3039	Maintain mechanical services equipment
CPCPRF2022	Select and install roof sheeting and wall cladding
CPCPRF2023	Collect and store roof water
CPCPRF3021	Receive roofing materials
CPCPRF3022	Fabricate and install roof drainage systems
CPCPRF3023	Fabricate and install external flashings
CPCPRF3024	Install roof components
CPCPRF3025	Install roof coverings to curved roof structures
CPCPRF3026	Install roof sheets, wall cladding and complex flashings
CPCPSN3011	Plan the layout of a residential sanitary plumbing system and fabricate and install sanitary stacks
CPCPSN3022	Install discharge pipes
CPCPSN3025	Install pre-treatment facilities
CPCPSN3026	Install sewerage pumpsets
CPCPWT3020	Connect and install storage tanks to a domestic water supply
CPCPWT3021	Set out and install water services
CPCPWT3022	Install and commission water heating systems and adjust controls and devices
CPCPWT3025	Install water pumpsets
CPCPWT3026	Install and fit off sanitary fixtures, water services and adjust water service controls
CPCPWT3027	Install backflow prevention devices
CPCPWT3028	Install property service
CPCPWT3029	Install water pipe systems
HLTAID011	Provide First Aid
RIIWHS202E	Enter and work in confined spaces
UEECD0007	Apply work health and safety regulations, codes and practices in the workplace
UEERA0049	Install and start up single head split air conditioning and water heating heat pump systems
UEERA0059	Prepare and connect refrigerant tubing and fittings
UEERA0064	Recover, pressure test, evacuate, charge and leak test refrigerants - split systems

Want to find out more about the Plumbing Industry?

The Australian plumbing industry is currently valued at over $17 billion, making plumbing a career path that can provide a secure future, with both the stability and potential to earn a very comfortable wage.

Find out more

Career opportunities

Plumber
Roof Plumber
Plumber – Gas Fitter
Plumber – Mechanical Services

Save course

Share course

Want to find out more about the Plumbing Industry?

Find out more

Career opportunities

Plumber
Roof Plumber
Plumber – Gas Fitter
Plumber – Mechanical Services

Save course

Share course

We’re here to help…

At TasTAFE, we understand that everyone's journey is different and sometimes you might need some extra support to achieve your study or career goals.

Whether you are at the very start of your training, returning to study after a long break, or looking to upskill in a specific area, we're here to help you to be successful in your chosen field of study, apprenticeship or traineeship.

Our student support services are available for all students, and aim to provide the support you need to make your learning experience just that little bit easier.

Find out more about what support is available

RTO 60142. CRICOS 03041M.

CPC32420 Certificate III in Plumbing

Course overview

Locations

Attendance options

Study type

2025 Tuition fees

Interested in starting this course?

Want to find out more about the Plumbing Industry?

Career opportunities

Want to find out more about the Plumbing Industry?

Career opportunities

We’re here to help…

CPC32420
Certificate III in Plumbing